Jinli Technology

Committed to becoming a core switch service provider

Typical cases

JL3180G8 - Liquid Cooling

Liquid-cooled model: JL3180-M8-C0-R0-00

Product Introduction

The JL3180G8 is the first 1U single-socket rack server based on Intel’s Birch Stream platform, specifically designed for medium- and low-computing-power and storage scenarios both domestically and internationally. With its outstanding product specifications, lower costs, and superior performance-to-power ratio, it offers customers a cost-effective platform upgrade alternative, addressing challenges such as TCO and cross-NUMA issues. Paired with Rich IO SKUs, it delivers scalability comparable to dual-socket servers and supports all-flash and GPU configurations.

Product Features

Delay optimization for quick response

Ultimate design, flexible architecture

Efficient expansion, powerful cooling

The single-path architecture eliminates socket-to-socket communication issues, eliminating the need for UPI interconnects and cross-NUMA access, resulting in lower latency. This architecture enhances user experience, improves system efficiency, boosts interactivity, reduces packet loss rates, and supports a greater number of concurrent users.

Modular component design with flexible arrangement significantly optimizes the chassis depth, making it suitable for a wide range of application scenarios.

Each board card features a separate design, allowing for independent development, flexible combinations, and easy replacement, thereby enhancing architectural flexibility and improving customer maintainability.

System-compatible design that supports multiple SKUs, including both Rich IO and non-Rich IO models, without the need to replace the motherboard.

Supports up to 6 IO expansions, flexibly catering to high-I/O expansion use cases such as all-flash resource pools and GPU resource pools.

Improved thermal design, supporting Max TDP CPUs within a 1U form factor.

Technical Specifications

Product Model	Maintenance method	Cooling method
NF3180-M8-A0-R0-00	Late exit	Air-cooled
NF3180-M8-C0-R0-00	Late exit	Liquid cooling with cold plates
Product form	Height: 1U; Width: 19 inches; Depth: 780mm (excluding mounting ears)
Processor	1 Intel® Xeon® 6 processor (SRF-SP/GNR-SP), TDP 350W
Memory	Supports up to 16 DDR5 RDIMMs or 8 MCRDIMMs, and supports the platform’s maximum frequency.
Storage	10-bay configuration: Supports 10 x 2.5-inch hard drives, with optional SAS/SATA/NVMe support and hot-swappable capability. 4-bay configuration: ① Supports four 3.5-inch hard drives, with optional SAS/SATA/NVMe support and hot-swappable capability. ② Supports 4 E3.S 7.5mm hard drives (x4), with hot-swappable capability. 12-bay configuration: Supports 12 x 2.5-inch hard drives, with optional SAS/SATA/NVMe support; supports hot-swappable functionality.
PCIe expansion	Prerequisite: Optional 2 HHHL PCIe 5.0 x8 slots for SAS/Raid expansion Centered: ① One optional HHHL PCIe 5.0 x8 slot for SAS/Raid expansion ② Optional: 2 M.2 SATA/PCIe SSDs Rear 1: ① Supports 1 PCIe 5.0 FH slot ② Supports 2 PCIe 5.0 HHHL slots ③ Supports 1 PCIe 5.0 x8/x16 OCP 3.0 card Rear 2: ① Supports 2 PCIe 5.0 FH slots ② Supports 1 PCIe 5.0 x8/x16 OCP 3.0 card
Power supply	Two hot-swappable 550W/800W/1300W platinum/titanium power supplies, supporting 1+1 redundancy.
Operating temperature	Air cooling: 5℃~40℃ Liquid cooling: 5℃~45℃

Keywords:

None

Typical Cases

Zimbabwe National Supercomputing Center Phase 1 and Phase 2 overall construction project

Zimbabwe National Data Center Phase 1 Overall Construction Project, Phase 2 Disaster Recovery Center Overall Construction

Congo (Brazzaville) National Data Center Machine Room and Building Intelligent Construction Project

Share to

Business License